2A Battery Charger / Maintainer / Desulfator
Input: 100-240V AC;
Output Charging Current: 2A DC;
Output Voltages: 6V, 12V;
Charging Battery Types: Wet, Gel, MF, CA, EFB, AGM, Lithium;
Capacity Range: Up to 40 Amp-Hours; Maintenance: All Battery Sizes;
One of our most powerful, highest-performing, energy-efficient, and compact chargers yet. The charger is a 6V and 12V battery charger, battery maintainer, and battery desulfator rated at 2A for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries;
Much smaller and more power. Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use;
Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates;
Charge dead batteries - Charges dead batteries as low as 1V. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts;
Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life;
TE4-0307 | |
6V/12V STD, GEL, AGM, 12VLithium-ion | |
Input | 100-240V AC 50Hz to 60Hz; |
Output Voltages | |
Maintenance | All Battery Sizes |
Operating Temperature: | -4° to 104° F (-20° to 40° C) |
Storage Temperature: | -22° to 140° F (-30° to 60° C) |
Relative Humidity | 0 to 95% Non-Condensing |
30 Watts (Max) | |
Protection | Open-Circuit |
Overheating | |
Overcharge | |
Spark-Proof | |
Reverse Polarity | |
Housing Material | ABS |
Ingress Protection | IP65 Water Resistant |
Color | Customized |
Certificate | cETL/CE-EMC/CE-LVD/ROHS |